Showing posts with label multi-user MIMO. Show all posts
Showing posts with label multi-user MIMO. Show all posts

Wednesday, July 6, 2016

WiFi Alliance Expands "Certified" AC Standards

The WiFi Alliance just made it easier for IT directors to pick out client devices with the latest and greatest 802.11ac Wave 2 capabilities. The latest revision to the "Certified" stamp for 802.11ac indicates wireless gear with some key new operating standards.

Multi-User, Multiple Input, Multiple Output (MU-MIMO)
This Wave 2 AC feature improves upon Single User MIMO technology, which allows one client device to communicate wirelessly with an access point across multiple spatial streams at the same time. Before MIMO, client devices could only transmit on one radio spatial stream at a time.

Image from ontheflywifi.net
Multi-user MIMO now allows multiple client devices to simultaneously transmit and receive data from a compliant access point, which is an important innovation to meet the increased density and demand more and more wireless clients are placing on wireless networks. Most mobile devices these days only have enough antennas in them to communicate across 1 or 2 spatial streams. However, access points often have 3 or 4 spatial streams available. MU-MIMO allows an access point to use all of those spatial streams to serve data requests from more devices at once. Moving forward, 802.11ac "Certified" devices will support Multi-user MIMO.

160 MHz Channels
The 802.11ac standard allows devices to utilize significantly larger channel bandwidths. While 802.11n only permitted 20 MHz and 40 MHz channels on the 5 GHz band, with 802.11ac, 80 MHz, and 160 MHz sized-channels are possible. The bigger the channel, the higher the data transfer rate.

The previous version of the Certified stamp for 802.11ac only guaranteed use with 80 MHz channels. The new version promises compatibility for 160 MHz channels.

Image from meraki.cisco.com
However, it's worth noting that the leading WiFi experts still only recommend 20 MHz channels be used in high-density areas, because the 5 GHz frequency band has room for significantly more channels at that size. When you crank things up to 180 MHz, there are only two non-overlapping channels available, and your data transmissions are subject to much more interference, which in turn slows down your transfer rates. While it's nice to know the "Certified" AC stamp means 160 MHz is supported, the actual use-cases for channels of that size are going to be very rare -- even if you can manage to find a clean RF environment to use them in.

Four Spatial Streams
The latest "Certified" indicator from the WiFi Alliance means the device can operate on four spatial streams, a boost from the three promised previously. That means a potential 33% boost in transfer speeds over the same devices communicating with only three spatial streams.

When it comes to designing your network infrastructure, it's important to remember that the slowest device in a data chain will act as a bottle neck within that chain, and WiFi is no exception. Having 802.11ac Wave 2 access points throughout your building won't impact a performance boost over Wave 1 APs if your client devices aren't also rated for Wave 2 features. While Wave 2 clients are still few and far between (the technology is still fairly new), this new certification standard for 802.11ac from the WiFi Alliance will make it easier for IT to ensure their wireless devices are all firing on the same cylinders.

Tuesday, February 16, 2016

Cicso Meraki releases wave 2 access points, among other new products

Cisco Meraki is kicking off 2016 with key releases from all four of its products families: wireless, switching, security appliances, and mobile device management. The most noteworthy addition, is an 802.11ac wave 2 access point, crashing the market at an aggressive $1099 price point.

Meraki's new MR42 802.11ac Wave 2 access point

The MR42 sports 3x3 radio chains with wave 2's signature multi-user MIMO. It also includes a 4th radio chain dedicated to blue tooth. With multi-user MIMO in full swing, the new access point is capable of an aggregate data rate of up to 1.9 Gbps - communicating simultaneously with MU-MIMO compliant client devices. While MU-MIMO devices still have yet to hit the market, wave 2 access points currently represent the cutting edge in high-density WiFi solutions for the looming future of bring-your-own-device dynamics. WiFi experts agree that the capacity limits of 802.11n, 802.11ac wave 1 access points, and their single-user MIMO capabilities will fall short of efficiently servicing the wireless connectivity needs of the device volume we'll see by 2020. Those who want to be prepared for that future now, would do well to consider adopting 802.11ac wave 2 access points.

In Meraki's switching department, new fiber switches with 16 and 32 SFP interfaces are now available in the MS 410 series. These models feature two SFP+ (1/10 GbE) uplinks (four of them in the 32 port model), and are virtually and physically stackable up to 8 units. The MS410-16 hardware is priced at $8,500, while the 32 port version (MS410-32) is $15,000.

MS 410-16, Meraki's new 16 port, fiber aggregation switch

When it comes to security appliances, Meraki announces the MX65 and MX65w. These new firewalls feature 2 dedicated internet ports for failover, eight 1 Gig ethernet ports, along with 2 PoE+ lan ports and support up to 50 concurrent client devices. The additional ethernet ports mean cost savings for smaller network deployments, as investing in an additional switch may not be necessary to enjoy Meraki's layer 7 management capabilities in switching. The MX65w packs the same punch, but with 802.11ac wireless capabilities also built in. Hardware MSRP is $945 for the MX65, and $1,245 for the MX65w. For small office deployments, the MX65w potentially represents an all-in-one solution for not only a stateful firewall and redundant internet uplinks, but also enterprise, gigabit switching, and 802.11ac wireless connectivity.

Meraki's new MX65w: an all-in-one firewall, switch, and 802.11ac access point

Finally, Meraki rounds out its surge of product updates in a number of improvements to their mobile device manager solution, Systems Manager / Sentry. Systems Manager now includes support for Android for Work applications, FileVault2 integration, as well as added Windows 10 network options. Additionally, new Windows 10 and OSX features make desktop management easier, and include a more powerful and user-friendly installer. Systems Manager is always free to try and use for up to 100 devices. For networks needing to register more than 100 devices, MSRP is $40 per device per year, $80 per device per 3-years and $120 per device per 5-years.

All of these new additions make Meraki's cloud-based solution and industry leading layer-7 management more attainable for smaller enterprise networks. All this and more are available on our website, www.copperwifi.com, with additional discounts available on Meraki orders over $5,000.


Thursday, May 28, 2015

Aruba enters the 802.11ac wave 2 landscape



Aruba is throwing their hat in the ring on the next wave of 802.11ac with yesterday's announcement of their 320 series access points. The initial wave one release of 802.11ac gear enjoyed a solid 3x increase in throughput over 802.11n gear, as wireless data transfer rates of 1.3 Gbps in the 5 GHz band became possible. Wave two and Aruba’s 320 series looks to further increase that ceiling to over 1.7 Gbps, and while the extra 400 Mbps may not seem particularly significant, there are a couple unique features to the wave two tech that give these APs a significant competitive advantage when it comes to serving the exponential expansion of devices looking for room on crowded wireless networks.


“Moo-My-Moe!”
While we’ve grown used to “MIMO” (multiple in; multiple out) as a transmitting method since the adoption of 802.11n back in 2009, 802.11ac wave two devices will take advantage of multi-user MIMO (MU-MIMO). This transmitting method allows each antenna on the AP to transmit data to different MU-MIMO capable devices simultaneously, a critically fundamental improvement on every previous transmission method, which could only transfer data to one client at a time. With the emergence of WiFi in more and more devices, from tablets, to phones, to watches, to HVAC systems, and other consumer appliances, MU-MIMO transfer methods are going to be essential in servicing all the different signal requests bombarding wireless networks. With four pairs of antennas, one Aruba 320-grade AP with multi-user MIMO will be able to handle the same device capacity as three enterprise grade wave one 802.11ac access points. While only MU-MIMO compatible client devices will be allowed to take advantage of this extra capacity, applying this compatibility is often as simple as a firmware upgrade for client devices and likely not a substantial barrier to overcome.





When MU-MIMO devices do start hitting the landscape in mass, Aruba’s patented ClientMatch technology on the 320 series units will detect these devices on the network, and direct them to MU-MIMO capable APs, ensuring that data transmissions are optimized on the network.


More spatial streams, please?
“Coming right up!” says Aruba. While wave one APs have been pretty much stuck at three spatial streams, Aruba’s 320 line will offer a fourth. This essentially amounts to a 25% boost to throughput for ALL devices flowing through the AP, and that’s not even counting the capacity management made possible by MU-MIMO.

802.11ac wave two on the horizon
Aruba’s 320 series isn’t the only wave two AP solution shipping this summer. Rukus was actually first to market back in April with their Zone Flex R710 unit. It’s expected to be available within this quarter, and touts the same data transfer rates as Aruba’s 320 series. Cisco will likely have a wave two AP out this year, too, with mounting pressure to keep up with the competition. While the release of the next generation of 802.11ac is exciting, it is unlikely to be fully appreciated until later in 2015 and even 2016, as devices capable of multi-user MIMO will need time to get out into the hands of consumers. We certainly look forward to seeing how these devices perform in our testing environments and will post further updates as they become available.